Water source or geothermal energy heat pump

Product Name : Water source or geothermal energy heat pump
Parameters: [ Parameters table ]

Introduction
1.Energy efficiency is higher than air heat pump¡¯s and saves more energy when   it operates.
2.the operation shall not be affected by air and environmental temperature,
  and is more stable, supply hot water all the year round.
3.It heats and also can cools simultaneously, and consumes less energy.
4.Cooling water can be groundwater, waste heat, waste water, cooling water of
  air-conditioner. Locking into cooling water of air-conditioner can be used
  as air-conditioner, at the same time, can produce hot water.
5.Scheme of groundwater is adopted then can be used to heating equipment in
  winter.
6.Heating pump and producing hot water pump are often used in Europe.
7.It¡¯s suit for hotel, villa, school, hospital, vacation, sauna, factory and
  so on.

 


Parameters:1.the temperature above should be measured under the 20¡æ of Water exiting temperature. 2 set can be used the
   places with above 10¡æ heat source. 3 the geographic pipe is be used, and antifreeze fluid need to be mixed.4 the life hot
   water  produced should be sent to 50~60¡æ. Adopting the floor radiation warm should be sent to 35~40¡æ in room. Adopting flow
   fan pipe  warm should sent to 40~45¡æ in room.
type KSRS2700S KSRS4350S KSRS8700S KSRS17400S KSRS26200S
 Rating Water exiting temperature  (¡æ) 22-55 regulable
 The highest Water exiting  temperature(¡æ) 60
 Heating volume(KW) 13 21 39 78 115
 Input power(KW) 2.7 4.35 8.7 17.4 26.2
 voltage(V) 220V/50Hz 380V/50Hz
 Rate of producing water(L/H) 305 510 980 1980 2970
 condenser Type Stainless steel plates heat exchange
flux[M3/H] 2.8 4.4 8.5 17 27
 Evaporator Type Stainless steel plates heat exchanger
flux[M3/H] 2.7 4.3 8.3 16.2 26
 Drain connection size£¨MM£© DN20 DN32
 Outline size£¨MM)LxWxh 550*750*700 550*750*850 550*750*1338 550*750*1490
 Weight£¨KG£© 105 135 280 560 920
[ close ]